Hi, have a little problem with soft top frame, I’ve managed to mix-up all the washers and spacers as I didn’t expect to re-use any them. The spec and quality of the new replacement pivot kit is so poor that most of it is going in the bin. I need to sort the old washers now so is there anyone out there who knows their WP0111 from their WP0179? And while we are at it how thick is a 623729 or 30?
Washer thickness?
WP0033
WP0111
WP0179
Spacer thickness?
623729
623730
Over the last 2 months I have stripped, straightened and painted most of the metalwork including a weld repair to the front header corner plate which had snapped close the rivet point. Generally it was in good condition considering the 26 years of heavy use since I last overhauled and re-covered it.
Thanks in advance.
Washer thickness?
WP0033
WP0111
WP0179
Spacer thickness?
623729
623730
Over the last 2 months I have stripped, straightened and painted most of the metalwork including a weld repair to the front header corner plate which had snapped close the rivet point. Generally it was in good condition considering the 26 years of heavy use since I last overhauled and re-covered it.
Thanks in advance.