I have one of these (13 inch) fans fitted to my Sunbeam Tiger, but as it is not the correct size I am going to remove it and fitted the correct 14 inch one.
They work by having stainless steel flexible blades that are effective at low speeds, but flatten out at high revs so they dont waste valuable fuel and engine power.
There are no moving parts to fail so they are very reliable.
If anyone want to try this one on a Stag please let me know. You may have to fabricate a bracket as the fitting is by four bolt holes with a central hole for clearance of the shaft.
If anyone is interested I could help with pix or dimensions etc.
They work by having stainless steel flexible blades that are effective at low speeds, but flatten out at high revs so they dont waste valuable fuel and engine power.
There are no moving parts to fail so they are very reliable.
If anyone want to try this one on a Stag please let me know. You may have to fabricate a bracket as the fitting is by four bolt holes with a central hole for clearance of the shaft.
If anyone is interested I could help with pix or dimensions etc.