Clutch master cylinder

[new to this]

the pipe that fit between the clutch reservoir and the master cylinder what size is it 6mm or 8mm

thanks dave

[pcoleman]

imported post

just fitted a new one ready to replace the cylinder I will have a look tonight and post the details.

pete.c

[ukbiggles]

imported post

Hi, just had the part delivered from Rimmers yesterday. Looks like 6mm to me

Gord

[pcoleman]

imported post

just measured mine at 8mm with a 3mm wall thickness.

regards. pete.c

[ukbiggles]

imported post

Hi Dave & Pete

After Pete's post, I had another look as he has a different size. The new part from Rimmers is definitely 6mm hole with a 3mm wall thickness, so 12mm in all.

It is a pretty tight fit on the reservoir pipe but it does go on. I measured the old pipe and the hole is 8mm with an outer wall size of what looks like 4mm, but it could have been 3 originally.

So I would suggest either 6mm or 8mm will do as you'll be using clips to seal each end anyway

Cheers

Gord

[new to this]

imported post

ukbiggles wrote:

Hi Dave & Pete

After Pete's post, I had another look as he has a different size. The new part from Rimmers is definitely 6mm hole with a 3mm wall thickness, so 12mm in all.

It is a pretty tight fit on the reservoir pipe but it does go on. I measured the old pipe and the hole is 8mm with an outer wall size of what looks like 4mm, but it could have been 3 originally.

So I would suggest either 6mm or 8mm will do as you'll be using clips to seal each end anyway

Cheers

Gord

thanks pete and gord

dave