Just to let you all know and following on from a previous thread about specialist tooling and services there is now a complete set of special tooling in my care for doing rear hub bearings.
The 2 purpose made spanners I had made and the tooling for the Press courtesy of Steve "Stag Muffin" make the job quite easy. I did a set yesterday for another member.
It can be done DIY but you will need access to a hydraulic press and DTI gauge although I maybe able to help you out with this if you are willing to come to me for access to the press.
I'm in South London, pm me if you you need them.
Ian.
The 2 purpose made spanners I had made and the tooling for the Press courtesy of Steve "Stag Muffin" make the job quite easy. I did a set yesterday for another member.
It can be done DIY but you will need access to a hydraulic press and DTI gauge although I maybe able to help you out with this if you are willing to come to me for access to the press.
I'm in South London, pm me if you you need them.
Ian.
). and a big thank you also to Stag muffin for supplying the special tooling - it worked a treat. I read about 12 tons on the Press' gauge before the hub parted.
Comment