Hello, guidance needed on howmuch wear is acceptable in the rear driveshaft splines - my stag appears to have done nearly 100,000 on the original looking driveshafts and it does twitch nicely - i notice that if i push the centre gater coverign the splines i can see and hear lateral play about 1/32 to 1/16 inch movement also if i twist the differential end of the shaft there is probably about the same amount of radial play between splines. I do have a an audiable clunk only when pulling away from stationery although this sounds like it is coming from the front of the propshaft and not the drive shafts.
How long should the drive shafts last if never greased - any ideas - should i just scrap them and buy new?
How long should the drive shafts last if never greased - any ideas - should i just scrap them and buy new?
Comment