Thermic sensor which way round

[Moraystag]

Gent's cleaned up the air intake housing and removed the thermic sensor which is held in place in the bottom section of the intake housing. I did draw a diagram to make sure I put it back in the correct way round. Unfortunately I sprayed over the diagram on my bench.
Could anyone tell me the correct way round this device goes into the base of the air filter housing. It has AC writen on it.

Mike

[V Mad]

Mike, I think it works the same either way round.

[Goldstar]

Hi Mike,

Not sure how helpful this is but looking at the ROM (17.30.01 & 17.30.10) it appears to be 90 degrees to the air box with the single hole in the sensor pointing to the ns of the car. I can't work out how to paste the picture but if you don't have the ROM I can email.

I'm sure someone will be along soon with a photograph of their car with it in situ - I don't have one fitted I'm afraid (Holley)

Cheers

Paul

[jbuckl]

tapered part of plastic moulding (upper) part of valve towards the n/s

[ukbiggles]

Hi Mike

ROM 17.30.10 attached

Cheers

Gord

ROM 17.30.10.jpg

[Moraystag]

Thank you chaps