Manual Gearbox Overhaul

[Marco Polo]

We have started to refurbish the manual gearbox with J type O/D on my son's car. Can anyone recommend a supplier for the bearings that need to be replaced? I also need the 3 grommets/walsh plugs that hold the detent springs for the selector rods in the top cover.

Thanks in advance,
Raoul

[Mike Stevens]

I expect Chris Witor will have them. Don't know about his overseas shipping, but I'm sure he'll help.

Cheers,
Mike.

[bunny]

Hi Raoul
I used a firm in Rugby, ill look it up later, i did all the o rings in the overdrive aswell, all good parts and its the only thing that is working fine since the rebuild lol
vince

[bunny]

Dam can't find it, iam sure someone will help you sorry

[Stagdad]

I think you are talking about Dave at www.odspares.com

[bunny]

Nice one thats the fellow

[Marco Polo]

Thanks for the replies guys, Chris Witor had the bearings and the link to the OD shop is great. I can't find a supplier for the 3 grommets/Walsh/core plugs that secure the detent and preload the selector rods in the top cover. Any ideas?
regards,
Raoul

[pj-tigger]

Try Moss under the TR6 external gearbox - they have them listed

[38rover]

Try these people have used then in the past very knowledgeable have found bearings for me from the 1930's that I was told were no longer available.

http://www.fiveways-bearings.co.uk/home.htm

[Marco Polo]

Try Moss under the TR6 external gearbox - they have them listed

Thanks for the lead, unfortunately they are listed as no longer available :-(

[redstag]

Hi Raoul,

Do you mean part 156665?

Try Mick Dolphin, he has them on his Triumph 2000 list

http://www.mickdolphin.co.uk/Files/2000%20Weblist%201112.pdf

Pete

[Marco Polo]

Hi Raoul,

Do you mean part 156665?

Try Mick Dolphin, he has them on his Triumph 2000 list

http://www.mickdolphin.co.uk/Files/2000%20Weblist%201112.pdf

Pete

Thanks for the link Pete, I have emailed him.
regards,
Raoul

[Lingen]

Raoul. If you have trouble obtaining the correct thrust washer assembly for the end of the countershaft in a Stag box, (rather than fit the 200/2500 ones that will go in but are wrong), these are now available again. The dished thrust washer, part number 154554 has been recently remanufactured. The other two pieces have always been available. Chec out the S.O.C. Spares website for availability. Mike.

[jleyton]

Chec out the S.O.C. Spares website for availability. Mike.

Have they got a website ?

When I go to: http://www.socspares.co.uk/ all I get is a picture of two Stags, an email address and a link to an Ebay shop.

Even on the Ebay shop I can't see the parts referred to above

Cheers

Julian

[redstag]

Hi Julian,

I get to their website by following your link.

Only one part for stag gearbox though.

http://socspares.co.uk/index.php?route=product/category&path=62_129_370

Pete