Paddocks web site.

[HersnotHis]

Nope.....

Thanks

But you're the first to confirm that you are successfully using this pump without a regulator or pressure/flow restriction device

[Seaking]

Thanks

But you're the first to confirm that you are successfully using this pump without a regulator or pressure/flow restriction device

i am also using the same pump from LD parts no regulator for past 5 years no problems

cheers Glenn

[Gresley]

i am also using the same pump from LD parts no regulator for past 5 years no problems

cheers Glenn

Me too.

[HersnotHis]

Thanks to all will probably go for the Ecco from LD

H

[V Mad]

The one I got from LD's in January was a straight one for one swap, very easy Only issue was a weeping union, but that was because I used fibre washers instead of the nylon ones that come with it.

Ian.

Mine foulded the bracket, and needed a lot of fettling, so it must be a different type to the others mentioned here. I seem to remember there were two different Ecco pumps at one time so maybe I bought the tricky one. Anyway, it works great with no reg needed.

[KOY 23]

Chris.

What is the recommended fuel pressure for the Weber?

[HersnotHis]

Mine foulded the bracket, and needed a lot of fettling, so it must be a different type to the others mentioned here. I seem to remember there were two different Ecco pumps at one time so maybe I bought the tricky one. Anyway, it works great with no reg needed.

Thanks but as said I asume yours is feeding a Weber not Strombergs which possibly have different pressure tolerances - Don't really know but you are the weber expert!

[Staggard]

Chris.

What is the recommended fuel pressure for the Weber?

Loads