ZF 4HP22 Sport mode?

[DJT]

There is a black plug on the side of the box with 2 pins in this operates the sport solenoid on the 4 hp 22 box but jpat do not have the plug and loom
any more. you could possibly get one from a breaker or Jaguar may be able to help.

That may be the case with the ZF from the XJ40 Sport, but not from the 'cooking' versions as far as I can make out. These pictures are of my first conversion 'box (now my spare) and the one fitted to my Stag is the same. Both came from 3.6 XJ40's.

ZF Left Side.jpgZF Rights Side.jpg

[new to this]

There is a black plug on the side of the box with 2 pins in this operates the sport solenoid on the 4 hp 22 box but jpat do not have the plug and loom
any more. you could possibly get one from a breaker or Jaguar may be able to help.

Is that plug only on the bmw box,ive not seen one on the jag box

Dave

[Seaking]

Here is a couple of pics of the gearbox I pulled as I thought I had a leak that turned out to be a jubilee clip that failed so it now sitting in my garage as the replacement is working fine. image.jpgimage.jpgAs you can see the early Bmw box as the 2 pin plug if any one has a plug to fit I would like to purchase.

Cheers Glenn

[mjheathcote]

Here is a couple of pics of the gearbox I pulled as I thought I had a leak that turned out to be a jubilee clip that failed so it now sitting in my garage as the replacement is working fine. [ATTACH=CONFIG]37911[/ATTACH][ATTACH=CONFIG]37912[/ATTACH]As you can see the early Bmw box as the 2 pin plug if any one has a plug to fit I would like to purchase.

Cheers Glenn

Just solder your own cable onto the pins and then 'pot' the socket to seal out any moisture.

[Seaking]

Just solder your own cable onto the pins and then 'pot' the socket to seal out any moisture.

I realy do not fancy laying on my back under the car soldering.

Cheers Glenn

[mjheathcote]

I realy do not fancy laying on my back under the car soldering.

Cheers Glenn

Friendly garage with a four post lift, you can do it standing up then!

[Seaking]

Friendly garage with a four post lift, you can do it standing up then!

That at will be Paul's garage (Stooligan) can recommend the bacon sarnies lol

[mole42]

Here is a couple of pics of the gearbox I pulled as I thought I had a leak that turned out to be a jubilee clip that failed so it now sitting in my garage as the replacement is working fine. As you can see the early Bmw box as the 2 pin plug if any one has a plug to fit I would like to purchase.

Cheers Glenn

Where is that plug located on the gearbox, I can't work it out from the photos! Also, can you take a photo of the plate that has the 4HP22 model number on it? I want to see if my gearbox has the same plug and if it's the same model.
Thanks, Richard

[Seaking]

image.jpgimage.jpgimage.jpgHere you go Richard

[DJT]

On the Jag box this is blanked off:

ZF Casing.jpg

[Seaking]

[ATTACH=CONFIG]37915[/ATTACH][ATTACH=CONFIG]37913[/ATTACH][ATTACH=CONFIG]37914[/ATTACH]Here you go Richard

Yesterday I applied 12v across the 2 pins and I could here a soliniod operate when I removed the 12v it returned.
Will need to wire up a switch and see what happens.

Cheers Glenn

[new to this]

Yesterday I applied 12v across the 2 pins and I could here a soliniod operate when I removed the 12v it returned.
Will need to wire up a switch and see what happens.

Cheers Glenn

Glenn

How did you get on with wiring up the switch

Dave

[Seaking]

Dave
i have been out all day in stag at high ham steam rally Langport so no chance today and tomorrow I am at Sherbourne Castle Classics and Supercars so no chance until Friday next week now.

Cheers Glenn