Hi can any body tell me how to free a inertia seat belt that has become locked,and wont allow belt to pull out? Both of mine that were removed and left lying about during resto are in this position. Or has any one got a pair for sale that are working? Ken :X01508 481988 or 07971 529716
-
Hi can any body tell me how to free a inertia seat belt that has become locked,and wont allow belt to pull out? Both of mine that were removed and left lying about during resto are in this position. Or has any one got a pair for sale that are working? Ken :X01508 481988 or 07971 529716
-
imported post
It is only a ball bearing that is preventing it from releaseing. You can usually knock it sideways to shift and and it will release. If not, just unbolt the unit from sill and give it a knock with you hand and it should do the trick
Good luck
Andrew
Yellow Rules OK -
imported post
Are these inertia units serviceable?
My rear beltsoccasionally stick, and the kids give me grief.!!:X as we gradually pull, and release, them to get enough belt to strap them in..!
..or do I just need to get some new units? (belts, not kids!!
)
Jer
sigpic Living the dream..!
Comment
-
imported post
Have taken belts off car hit them with a mallet stil locked !! i can hear the ball bearing rattling about!!!!! helpComment
-
imported post
My seat belts were sticking also frayed i sent them away had new webbing and new inertia reels fitted. Like new only with old buckles.
http://quickfitsbs.com
Paul
Comment
-
imported post
You need to adjust the sensors correctly Andrew...... they are not aligned with horizontal...... can take a while to get them right.
Comment
-
imported post
stagman444 wrote:You need to mount the the reels at the correct angle in a vice or screwed to a vertical piece of wood, and by hand try to wind the webbing ON to the reel a bit more - usually a quarter of a turn will do it.Have taken belts off car hit them with a mallet stil locked !! i can hear the ball bearing rattling about!!!!! help
This should free off the locking mechanism and the webbing should come out fine.
Russ
Comment
-
imported post
Hi i thought it would be a simple job to refit and yet its a pain!i dont know whats worse trying to fit windscreen trim or setting up these belts/:?p.s. used to live quite near you Russ , we lived in Selsdon.KenComment
Comment