Announcement

Collapse
No announcement yet.

Fitting an A post seal

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

    Fitting an A post seal

    I am getting towards the end of my rebuild and wanting to fit the A-Post seals p. no. 630755. It is obvious where they run on the A-post but I cannot remember the route they take below that. If anyone has any photos I would appreciate it. Also would like to know how long they should be as mine seem excessively long.

    #2
    top of the A post to the bottom under the A post gutter. 813023/4 Use a sealant (tigerseal type) or it will leak. A job I need to do as well
    Paul - 3 projects, 1 breaker - garage built and housing 2 white Stags. One runs, one doesn't

    Comment


      #3
      I have a picture of the top end showing how the flat section fits between the Furflex seal and the windscreen frame (A-pillar). Just run it as far down the frame as it needs to be to be effective. They do usually supply plenty. decent double-sided sticky tape is what you need to attach it to the windscreen frame.



      Dave
      1974 Mk2, ZF Auto, 3.45 Diff, Datsun Driveshafts. Stag owner/maintainer since 1989.

      Comment


        #4
        Thanks for the answers folks. Double sided tape sounds the least messy.

        Comment


          #5
          Double sided tape sounds the least messy

          Its what I used to put mine on recently, having realised that for the last 25 years I've not had that seal fitted!
          Mike

          Comment

          Working...
          X