So after some while of having the dashboard and heater box out I am now trying today to put it back together - I have got to the point of securing the dash into place and am now stuck !
Ive been pretty careful about labelling stuff and noting where everything came from and I believe the two bolts in pic one are used to secure each side of the dash. The smaller bolt on the right goes into he hole first circled in red and allows the dash to tilt up and down, this has worked how i was expecting and then the larger blue bolt goes in from where the door is hinged to secure and fix the dashboard.
However the larger bolt doesn’t seem long enough ? And I don’t have any other bolts ? Is my theory above incorrect or am i missing something ?
There is very little in the workshop Manual about this and no drawings
Any help appreciated !
Darren
D9C72077-EE4A-4E67-B614-D00D95A3E6A0.jpegB65AC94A-836E-4539-A989-73926E99A1C5.jpeg4C8D98BB-FEBF-4627-8AAC-E9345A306C60.jpeg
Ive been pretty careful about labelling stuff and noting where everything came from and I believe the two bolts in pic one are used to secure each side of the dash. The smaller bolt on the right goes into he hole first circled in red and allows the dash to tilt up and down, this has worked how i was expecting and then the larger blue bolt goes in from where the door is hinged to secure and fix the dashboard.
However the larger bolt doesn’t seem long enough ? And I don’t have any other bolts ? Is my theory above incorrect or am i missing something ?
There is very little in the workshop Manual about this and no drawings
Any help appreciated !
Darren
D9C72077-EE4A-4E67-B614-D00D95A3E6A0.jpegB65AC94A-836E-4539-A989-73926E99A1C5.jpeg4C8D98BB-FEBF-4627-8AAC-E9345A306C60.jpeg
Comment