Just wondering what sadistic moron designed the sway bar and trans cooler mounting. The rest of the entire font suspension came out easy. Going to re-design it so it goes in from the bottom, don't have to pull the ps pump out of the way. Some brain dead professional was there before me so several bolts were missing. Anyway, it is worth it. Top bearings were rough, shocks were shot, end link and TC rod rubbers shot. Springs were about 1/2 inch settled.
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. Registration to this Forum is open to Members of The Stag Owners Club (SOC) and Affiliated Overseas Clubs. Non members with an interest in the Triumph Stag may avail of a 30 day trial membership of the Forum. Details in the FAQ section. Registration is not necessary if you just wish to view the forums. To start viewing messages, select the forum that you want to visit from the selection below.