Wheel Offset

[mopoole]

Does anyone know what the offset for the Stag wheels is? Don't seem to be able to find any info anywhere
Many thanks
Maurice

[mike@thenook]

The alloys are 5.5" wide and ET 28, not sure about steels but are 5" and probably around ET30

[sujitroy]

something I saved

4.5" or 114.3mm is the PCD.

Standard off-set is 28mm,

[mopoole]

Thanks Guys

Maurice

[jbuckl]

Sorry if it’s teaching you to suck eggs but if you half the new wheel width increase & subtract it from the original offset, that should be the offset on the replacement
e.g. your new wheel is 25.4mm wider /2 = 12.7; subtract from 28 gives 15.3 new offset.

keeps the geometry similar, the closer the rolling radius to original the better too.