Hi All, Just cleaned up and tested the window regs for my Stag, they both run well however one skips off the end of the large tooth on the arm which causes the arm to spin round and try to remove pieces of me !. the issue is a bit of play in the pivot, however I am wondering if once fitted is it an issue as it will be lifting the window so I assume the window is closed before the arm gets to the end of the teeth anyway ?
-
Last edited by Chris01573; 28 January 2023, 16:46. -
From what I've gathered. the arms are universal. they have 2 part no. for left and right. The motors are handed. so depending on what side it is used it may come off on the up or down. for down, make sure the block at the bottom of the door in on. I have a few YouTube videos on windows.
Sujit -
For up, the frame stops the glass.
SujitComment
Comment