Rev gauge and fuel gauge not working

[GaryB1964]

Hi my Rev gauge and fuel gauge have stopped working I have checked the fuse which is ok and the earth is connected to the gauges any ideas what is causing this I have also changed the 10v stabiliser

[Chris01573]

I doubt the two issues are connected, If your temp gauge is fine then voltage stabiliser would not be the issue, most likely a wiring issue somewhere just trace the wires and make sure the earth connections are good

[GaryB1964]

Hi Chris, thank you for your reply I traced it to a green feed wire off fuse 3/4 as I had also lost the brake lights bad connection which I wasn’t able to trace so fed a bypass