Had a problem in that I was loosing water into the vee. Not just a leak, a lot of water. Pulled the manifold and because I have a Wards bung fitted with an external pump I left that alone assuming I had a failed manifold gasket. Rebuilt it all up and leak is just as bad. Different manifold fitted so it’s not the core plug. Need to have a look with a camera but from what I can see from above I suspect it’s coming from the pump area. Has anybody else had the o rings on the bung fail or similar problems with the brass bung and can a failed head gasket leak into the vee?
- If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. Registration to this Forum is open to Members of The Stag Owners Club (SOC) and Affiliated Overseas Clubs. Non members with an interest in the Triumph Stag may avail of a 30 day trial membership of the Forum. Details in the FAQ section. Registration is not necessary if you just wish to view the forums. To start viewing messages, select the forum that you want to visit from the selection below.