Just about to take the Stag off the ramps & stands after a minor bit of welding and finally getting around to fitting the new propshaft/gearbox mounts and she won't start. All the rightlights are on but not a dickey when I turn the key.
Quick shufty underneath andI've snapped off the IGN connector on the solenoid. Not just pulled the wire off but actually snapped the connector clean off. Must have been loose anyway :?
Starter's now on the bench with knuckles suitable skinned. Anyone care to recommend a supplier for a new solenoid? I've started to de-solder the old one to see if I can patch a connector but theydon't seem too expensive so I'll probably fit a new one.
Starter is Lucas (obviously!) and has 25648H stamped on it, the solenoid 76884B, so I assume I need one of these:
Should be black though.
Edit just a quick afterthought; bolts holding the solenold on were 10mm; electical connections 13mm. Lucas metric fittings whatever next?
Quick shufty underneath andI've snapped off the IGN connector on the solenoid. Not just pulled the wire off but actually snapped the connector clean off. Must have been loose anyway :?
Starter's now on the bench with knuckles suitable skinned. Anyone care to recommend a supplier for a new solenoid? I've started to de-solder the old one to see if I can patch a connector but theydon't seem too expensive so I'll probably fit a new one.
Starter is Lucas (obviously!) and has 25648H stamped on it, the solenoid 76884B, so I assume I need one of these:
Should be black though.
Edit just a quick afterthought; bolts holding the solenold on were 10mm; electical connections 13mm. Lucas metric fittings whatever next?
Martin.
Comment