Wind deflector support brackets advise please

[KOY 23]

Drilled a line of holes and filed smooth.

[shuckie]

Sounds easy so I will cross my fingers when I do it!! Thanks.
Keith.

[stag8manod]

For mine I applied masking tape to the area and carefully drilled a hole at each end of the size slots I wanted and used a jigsaw and file to finish.
Cheers Ian A

[StagJonno]

Based on my experience drilling perspex for control panels many years ago, make sure your drill bits are in very good condition to reduce the likliehood of splits. From memory, I used a pilot hole before the big bit and went in with a reasonably high speed on the drill. Support the piece firmly.

Jonno

[shuckie]

Rimmers Wind Deflector problem.

I bought a Rimmers screen years ago, the top banged against the T bar at speed. Cut two slots in the screen and strapped round T bar with Velcro straps. No more banging, I would deem straps necessary.

Thanks for the advise everyone - Slots now cut and deflector doesn't bang any more - Rimmers can deem off. - they did however offer me a full refund!